Sales Hotline: +86-510-85251870 email:[email protected] Welcome to Wuxi Kang Sida Machinery & Electric Appliance!

Feedback Contact

+86-510-
85251870

Products

High Speed Pulley Type Wire Drawing Machine


The LW series pulley type wire drawing machine is a traditional wire drawing equipment. For suitability, if the trunk is equipped with a trunk unloading machine, the coil weight can be unloaded at any weight below one ton, and the front cable can be unloaded, which is especially suitable for tightening. Turnover use in the firmware industry. According to the customer's drawing requirements, single-head and multi-head combinations can be used. The gearbox noise of this machine is less than similar products, and the gears are thick Actually, frequency conversion speed regulation. 

 机台主要技术参数 Main technical parameters of the machine

典型型号 Model LW10/560钢丝 LW10-560低碳丝 LW10-560铜丝,铝丝
卷筒直径 Capstan diameter (mm) 560 560 560
拉拔道次 Drawing passes (draft) 10 10 10
进线强度 Inlet line intensity (draft) ≤1100 ≤500 ≤500
******进线直径(mm) Max.Inlet size diameter 6.5 6.5 6.5
最小出线直径(mm) Min.Outlet size diameter 2.0 1.8 1.8
总压缩率 (%) Gross compression rate 90.53 92.3 95
拉拔速度j Drawing speed :m/min) 360 360 360
电机功率 Motor power (Kw) 22 15 15-18.5
拖动方式 Drag way   用户可选用:普通电机、变频电机
备注 Note 拉拔道次与卷筒直径可根据用户要求定制

Home | Company | News | Products | Recruitment | Feedback | Contact

COPYRIGHT © 2017 WUXI KANGSIDA MECHNICAL ELECTRIC APPLIANCE CO., LTD.