Sales Hotline: +86-510-85251870 email:[email protected] Welcome to Wuxi Kang Sida Machinery & Electric Appliance!

Feedback Contact

+86-510-
85251870

News

Introduction about the water tank wire drawing machine performance test
announcer:jtall  release time:2013/5/22  click :2948

How much we know about the wire drawing machine? Maybe we haven’t introduced enough about the water tank wire drawing machine before, but never mind, today we will share with you how to test the performance of the water tank wire drawing machine. KANGSIDA machinery will accompany us about this.

We can test from three aspects, first of all we can detect the breakage, if the number of PID feedback value in 34-35, so the frequency converter of the KANGSIDA machinery water tank wire drawing machine will free to stop, so there will be a disconnection alarm at the output terminal. In order to prevent false positives when starting and stopping of the situation, we can put the inverter startup settings in H-36, also should open the detection function of breakage at the same time.

 There is a brake control, if we detect the breakage, then the terminal output brake signal will pass through H-39, It will automatically restore the disconnection fault, the breakage signal will be canceled. When the brake signal is at the output time, the operation instruction is not the same. There is a host of the output frequency to line speed given, so as to guarantee the linear relationship between the amount of take-up and host, the frequency of the host and the take-up machine is almost the same.

Unless noted, mechanical make constant as the original article, welcome reproduced! Reprint please indicate the address, thank you.
Source of the article:http://www.ksdjx.com/

 

prev :Understanding the performance of straight wire-drawing machine
next :Analyze the operation requirements of the drawing machine
    

Home | Company | News | Products | Recruitment | Feedback | Contact

COPYRIGHT © 2017 WUXI KANGSIDA MECHNICAL ELECTRIC APPLIANCE CO., LTD.